Brother T74 - Manual (Page 67)

Message Manager (Only for FAX-T76)
61
AD
V
ANCED USE
Fax Forwarding/Paging
When Paging is set to ON, your machine dials the pager number you have programmed and, when
connected, plays the Paging OGM message you have recorded for 60 seconds. This activates your
pager and let you know you have a fax or voice message in the Message Manager memory.
When Fax Forwarding is set to ON, your machine dials the fax machine phone number you’ve
programmed, and forwards any faxes you’ve received.
Programming a Fax Forwarding Number
1
Press Menu/Set , 8 , 6 .
2
Press or until the screen displays FAX FORWARD, and press Menu/Set .
The screen prompts you to enter the number of the fax machine where faxes will be forwarded.
3
Enter the forwarding number (up to 20 digits), and press Menu/Set .
4
Press Stop to exit.
You can change a Fax Forwarding number remotely.
Recording the Paging Outgoing Message (OGM)
Before paging can work, you should first record the Paging OGM.
1
Press Menu/Set , 8 , 3 . The screen prompts you to choose an OGM.
2
Press or to reach PAGING MSG., and press Menu/Set .
3
Press or to select RECORD MSG, and press Menu/Set .
4
Pick up the handset to record a message.
5
Press Stop . The Message Manager plays your OGM.
6
Press Stop .
Programming the Paging Number
1
Press Menu/Set , 8 , 6 .
2
Press or until the screen displays PAGING, and press Menu/Set .
The screen prompts you to enter your pager number.
3
Enter your paging number up to 20 digits and press Menu/Set .
This is the telephone number which your machine must call.
4
Press Stop to exit.
You cannot use Paging and Fax Forwarding at the same time.
You cannot change a Paging number remotely.