Brother T74 - Manual (Page 49)

Advanced Receiving
43
AD
V
ANCED USE
1
Press Activation Voice Code 8 1 at remote cordless phone.
2
The fax machine rings (pseudo-ring same as current F/T ring) and the display shows “PICK UP
PHONE”.
3
Pick up the handset and press Tel or Speaker Phone ––OR––just press Speaker Phone at
the fax machine in order to transfer the voice call to the fax machine.
If nobody answers at the fax machine, pseudo-ringing stops after 30 seconds. In that case, it may still
be possible to speak with the caller from the cordless phone. Speech between the fax machine and
the cordless phone (= intercom) is not possible.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation Code is 5 1 .
The preset Deactivation Code is # 5 1 . The preset Activation Voice Code is 8 1 .
To change Remote Codes
1
Press Menu/Set , 2 , 4 .
2
Press or to select ON (or OFF), and press Menu/Set when the screen displays the setting
you want.
3
If you want to, enter a new Remote Activation Code, then press Menu/Set .
4
If you want to, enter a new Remote Deactivation Code, then press Menu/Set .
5
If you want to, enter a new Activation Voice Code, then press Menu/Set .
6
Press Stop to exit.
Telephone Services
Your FAX supports the Caller ID and BT Call Sign (For U.K. Only) telephone services offered by
some telephone companies.
Caller ID (Caller IDentification)
Caller ID is a telephone service that allows the subscriber to see a display of the caller’s phone number
as the telephone rings. It is a fast way to screen your calls. You can respond quickly to calls you missed,
because Caller IDs are received and stored in your machine’s memory. In addition to the standard
Caller ID features, you can select a Caller ID and have your machine dial the number for you.
Don’t hang up the call from the cordless phone until the voice call has been
transferred to the fax machine. You will know when this is because you will no
longer be able to hear or talk to the caller via the cordless phone. If you do not wait
until this point before hanging up from the cordless phone, the call will be lost.
If you are always disconnected when accessing your external TAD remotely, try
changing the Activation Code from
5 1 to # # # and the Deactivation Code from
# 5 1 to 1 1 1. You cannot use the same number for the Activation Code and the
Deactivation Code.