COATS 6275HS Truck Wheel Balancer - Manual (Page 4)

I 0708 - 3
/41,5 inches
/35 inches /47,6 inches
/25,6 inches
/16,9 inches
RUOTE PER
MOVIMENTAZIONE
LEVA DI
LANCIO
TASTIERA E
DISPLAY
LEVA SOLLEVAMENTO
CALIBRO
AUTOMATICO
MANDRINO
GB
1 - GENERAL
1.1 - GENERAL SAFETY REGULATIONS ►
■ The machine should only be used by authorized and suitably trained per-sonnel.
■ Do not use the machine for purposes other than those specifi ed in this manual.
■ The machine should not be modifi ed in any way except for those modifi cations explicitly carried out by
the
fi rm.
■ Never remove the safety devices. Any work on the machine should only be carried out by specialist per
sonnel.
■ Carefully clean the coupling surfaces before performing any operation.
■ Avoid using strong jets of compressed air for cleaning.
■ Use alcohol to clean the plastic panel or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
■ Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the adapter.
■ The machine operator should avoid wearing clothes with fl apping edges. Make sure that unauthorized
personnel do not approach the machine during the work cycle.
■ Avoid placing objects inside the base as they could impair the correct operation of the machine.
1.1.1 - STANDARD SAFETY DEVICES ►
The wheel guard is not compulsory since the balancing speed is less than 100 rpm. ■
1.2 - FIELD OF APPLICATION ►
The machine is designed for balancing wheels of cars and motor vehicles weighing up to 250 kg. It can be operated
in the temperature range of 0°C/32°F to + 45°C/113°F.
The following functions are provided: ALUM, SPLIT; Unbalance optimization; Self diagnostics; Self calibration.
1.3 - MAIN PARTS ►
1.4 - ► OVERALL DIMENSIONS
CONTROL PANEL
AND DISPLAY
AUTOMATIC GAUGE
SHAFT ASSEMBLY
SPINNING LEVER
LIFTING LEVER
WHEELS TO MOVE THE WHEEL BALANCER