COATS 6275HS Truck Wheel Balancer User Manual
Page 10
I 0708
-
9
GB
5.2.2 -
►
MODIFYING SET DIMENSIONS
If the wheel dimensions have been entered incorrectly, the parameters can be modifi ed without repeating the balan-
cing spin by pressing :
access parameter modifi cation
→
(select
to modify: ( ) distance, (
) width, ( ) diameter
→
to obtain the new measurement
or:
pull out the gauge to repeat the measurement
→
to obtain the new measurement.
5.2
►
.3 - EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE WITH CLIPS
Press the button
if using the correction method with weights on the inside of the rim
.
Fit the correction weight in the specifi c gauge seat with the adhesive
■
part facing upwards
Bring the wheel into correct angular position for the plane to be
■
corrected.
Pull the gauge further outwards.
■
Return the gauge to the rest position.
■
INSIDE CORRECTION POSITION
■
OUTSIDE CORRECTION POSITION
■
■ When the weight application distance has been reached a beep is sounded (can be deactivated).
■ rotate the gauge until the correction weight adheres to the rim
■ the fact that the weight application position is no longer vertical is automatically compensated
■ to cancel this function, press
button again.