COATS 6275HS Truck Wheel Balancer - Manual (Page 11)

I 0708 - 10
1
2
1
2
1
2
1 2
1
2
GB
5.2.4 - SPLIT FUNCTION ( ► UNBALANCE RESOLUTION)
The SPLIT function is used to position the adhesive weights behind the wheel spokes so that they are not visible. This
function should be used in ALU mode where the adhesive weight is applied on the outside. Input the wheel dimensions
and do a spin.
Turn the wheel to the outside unbalance correction position ■
as indicated by the machine
Position one spoke at 12 o'clock (e.g. 1) and press ■
Following the rotation direction indicated on the display, posi- ■
tion spoke 2 at 12 o'clock and press
Position the wheel as indicated by the LEDs. ■
The unbalance is indicated on the right-hand display
Repeat the operation for the other spoke ■
To return to normal unbalance display, press any button.
NOTE: The distance between the spokes must be at least 18° and at most 120° (if not, the errors 24,25 or
26 appear). Spokes with irregular or inconstant angles can be compensated.