CiDRA GVF-100 Gas Volume Fraction Monitoring System - Manual (Page 9)

Copyright © 2006 CiDRA Corporation Page 3-1
20639-01 Rev 03
3
EQUIPMENT SAFETY COMPLIANCE
3.1 Safety
This equipment is listed with TÜV Rheinland of North America, Inc., a
nationally recognized testing laboratory, and certified for ordinary
location use per the following US, Canadian, and European standards:
UL 61010A-1, CSA C22.2 No. 1010, and EN 61010-1:2001.
If so marked, this equipment is certified by Underwriters Laboratories
for use in areas that - under fault conditions - include explosive gas
atmospheres as defined by Class I, Division 2, Groups A, B, C, and D
per compliance with these US and Canadian standards: UL 1604, UL
508, CSA C22.2 No. 213, and CSA C22.2 No. 142.
3.2 North American Emissions
This equipment is compliant with Class A limits for radiated and
conducted radio noise emissions, as defined in Subpart A of Part 15 of
the FCC rules, as well as the requirements defined in ICES-003 for
Canada.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 du Canada.
3.3 European Emissions and Immunity
This equipment is compliant with the requirements set forth in EN
61326-1:1997, Electrical Equipment for Measurement, Control and
Laboratory Use - EMC requirements as well as EN 55011:1998
Industrial, Scientific, and Medical (ISM) Radio Frequency Equipment -
Radio Disturbance Characteristics - Limits and Methods of
Measurement.
For the purpose of Electromagnetic Compatibility (EMC) requirements,
this product is categorized as Group 1, Class A ISM equipment. This
categorization applies to Industrial, Scientific or Medical equipment
that intentionally generates or uses conductively coupled (but not
intentionally radiated) radio-frequency energy that is necessary for the
internal functioning of the equipment. The level of EMC compliance is
consistent with industrial use but not for domestic purposes.
CAUTION
Class A equipment is intended for use in an industrial
environment. There may be potential difficulties in ensuring
electromagnetic compatibility in other environments, due to
conducted as well as radiated disturbances.