chiliGREEN 17 M670SU MK2 User Manual
Page 138
Troubleshooting
8 - 12 Problems and Possible Solutions
8
The
Wireless LAN/
Bluetooth/ PC Camera
modules cannot be
configured.
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions for the appropriate module in
The
BisonCap
PC
Camera application
displays the message
“Sorry, please turn on
the Video Capture
power (Fn + F10).” after
resuming power from
manually entering a
power-saving state.
The BisonCap application may not recognize that the camera module is powered on if you
manually put the system into Sleep or Hibernate, and then resume, when the BisonCap
application is still running.
Before putting the system into a power-saving state close the BisonCap application. If you
resume from a power-saving state and see the error message displayed by the BisonCap
application, simply quit the application and run it again.
The audio at Windows
startup, or when playing
mp3 format files in
Windows Media Player,
appears to lag (Model B
& C computers only).
This is a known issue with Celeron M CPUs. Contact your service center for CPU upgrade
information.
The Bluetooth module
is off after resuming
from Sleep (Model B &
C computers only).
The Bluetooth module’s default state will be off after resuming from the Sleep power-saving state.
Use the key combination (Fn + F12) to power on the Bluetooth module after the computer
resumes from Sleep.
Problem
Possible Cause - Solution