CHAMPION EUCC Series - Manual (Page 45)

37
_________ Installation Instructions

Section Assemby
Section Assemby
1. Wires, flex-tite, and some
components were disconnected and
pulled back to
each section, then junction boxes
were closed.
2. Open all junction boxes, identify the
flex-tite conduit connections, (A)
roll-out wire bundles, (B), and match
wire numbers attached on wires,
(C).
3. Connect the flex-tite conduit to their
associated junction boxes.
4. Connect matching wires using the
supplied wire nut connectors, (D)
included in the hardware kit.
5. Connect #2 and any white wires
together. All of these wires are
neutral returns.
6. Contact your Installation Supervisor
so he can inspect and approve the
work.
7. Close all junction boxes.
Connect the dishwasher internal electric wiring