CHAMPION EUCC Series - Manual (Page 38)

30
Installation Instructions _______

Section Assembly
Section Assembly
33. Bolt the section bases together
using three (3) 1/2-13 X 1"
bolts, lockwashers, and nuts
from the hardware kit.
34. Recheck the level of the
assembled sections and adjust
as needed to
achieve a common level line.
35. Refer to the photo on the
right.Arrows show the proper
installation of the section
u-clip.All section joints must be
capped by a u-clip.
36. Refer to the illustration
on the next page.
37. Apply a 1/2" bead of
Foodgrade sealant in the
bottom of the clip.
38. Invert the clip and slide it
over the section joint
39. Bolt the clip securely in place.