APG MPX Slave Sensor user manual - Manual (Page 16)

MPX Series Magnetostrictive Level Sensors
Rev. B, 4/13
16
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Modbus Register Lists
Input Registers (0x04):
Register Returned Data
30300 Raw Top Float Reading (in mm, unsigned)
30301 Raw Bottom Float Reading (in mm, unsigned)
30302 Temperature Reading (in 0 C, signed)
30303-30304 Calculated Top Float Reading (in selected Units)
30305-30306 Calculated Bottom Float Reading (in selected Units)
NOTE: the Calculated Readings will be returned without a decimal place. In
order to attain the true result, the Decimal Place setting must be taken into
account. Refer to the Decimal Place setting on page 19 for more information.
Holding Registers (0x03):
Register Function Value Range
40400 Device Address 1 to 255
40401 Units 1 to 3
40402 Application Type 0-10
40403 Volume Units 0 to 6
40404 Decimal Place 0 to 10364 mm
40405 Max Distance 0 to 10364 mm
40406 Full Distance 0 to 10364 mm
40407 Empty Distance 0 to 10364 mm
40408 Sensitivity 0 to 100
40409 Pulses 0 to 20
40410 Blanking 0 to 10364 mm
40411 Reserved n/a
40412 Averaging 0 to 100
40413 Filter Window 0 to 10364 mm
40414 Out of Range Samples 0 to 255