Anchor ANCHORSPAN AA 30FT-60FT - Manual (Page 5)

2
AA ANCHORSPAN™ FRAME/HARDWARE PARTS LIST
(See pages 3 & 4 for illustrations.)
Part/Assembly Description Quantity Comments
AA Base Column Assembly 2 per beam
AA Apex Assembly 1 per beam
AA 40’ Rafter Assembly 2 per 40’ and 2 per 60’ beam
AA 50’ Rafter Assembly 2 per 50’ and 2 per 60’ beam
AA 60’ Rafter Assembly 2 per beam (each =a 40’ and a 50’ joined)
AA End Upright (Short) 1 per 30’, 2 pe 40, 50’ and 60’ ends
AA End Upright (Long) 1 per 60’ end
AA End Center Bar/40’ 1 per 40’ Gabled End
AA Center Bar/50’ 1 per 50’ Gabled End
SpanLatch Purlin 4 per bay, except 30’ = 2 per bay
Dbl- SpanLatch Purlins 4 per building (if more than 3 beams)
AA Mid Eave Bars 15’ normally 2 per bay
AA End Eave Bars 20’ 1/end on 40’ & 50’, 2/end on 60’
AA Wing Eave Bar 10’ (Left) 1/end on 40’ & 60’
AA Wing Eave Bar 10’ (Right) 1/end on 40’ & 60’
AA Wing Eave Bar 15’ (Left) 1/end on 30’ & 50’
AA Wing Eave Bar 15’ (Right) 1/end on 30’ & 50’
AA Midwall Ground Bar 15’ normally 2 per bay
AA Endwall Ground Bar 20’ 1/end on 40’ & 50’, 2/nd on 60’
AA Wingwall Ground Bar 10’ 2/end on 40’ & 60”
AA Wingwall Ground Bar 15’ 2/end on 30’ & 50’
AA Baseplate 2 per beam
AA Baseplate Adapter Bar 2 per end plus 2 per recessed end
AA Purlin Bolt Assemblies 4/(40,50,60) bays, 2/30’ bay + 2 per Dbl G/End
AA End Beam Bolt Assemblies 12/(40,50,60) building 10/30’ building
AA Upright Bracket Bolt Assembly 1 per end upright (see “B” on chart
AA Wing Eave Brackets 1/wing eave bar (see Chart “x”s with squares)
AA Beam Joint Caps 2/30’, 4/40’ & 50’ or 6/60’ beam
AA Bent Arm Pin, 1/2” x 7-5/8” 1 per baseplate + 1 per adapter bar
#10 Hairpin Cotter 2 per bent arm pin
Ratchet Assembly (with hook) 4/bay + 2 per end panel (sloped or gabled)
AA Cross-Cable/ Green 4/15’ x-cabled bay (all AA AnchorSpans)
AA Cross-Cable/ Red 4/15’ x-cabled bay (all AA AnchorSpans)
AA Cross-Cable/ Blue 4/15’ x-cabled bay (60’ AA AnchorSpans only)
AA Cross-Cable/ Yellow 4/15’ x-cabled bay (50’ AA AnchorSpans only)
AA Cross-Cable/ Black 4/15’ x-cabled bay (40’ AA AnchorSpans only)
Stake Bar, 2’ (3-holed) 2 per sloped end panel
Century Winch Assembly 2 per sloped end panel
24” x 5/8” Steel Stakes 2 per end upright (both 60’ and adjustable)
42” Double Head Steel Stakes 4 per baseplate + 6 per sloped end
AA AnchorSpan Installation Kit Kit of Assembly Tools unique to Anchor
Optional Tools/ Accessories Not in kit (Priced and Sold Separately)
Century Winch Bar Tool For tensioning sloped end panels
Socket Wrench, 1/2” Hand tool for beam assembly
Sockets, 1-1/8” Hand tool for beam assembly
Combination Wrench, 1-1/8” Hand tool for beam assembly
Tape Line, 100’ For laying out footprint pattern
Drop Cloth 15’ x 15’ For protecting fabric during installation
Wood Blocks Allows finger holds for assembling beams
Stake Puller (Anchor Yanker) For removing anchoring stakes
Beam Clamp For hanging weights from beams
Shaded Areas Indicate Items Packed Together