Anchor ANCHORSPAN AA 30FT-60FT - Manual (Page 4)

ANCHORSPAN™ AA INSTALLATION INSTRUCTIONS INDEX
Page # Subject
2 List of Beam and Frame Components and Hardware
3 AA AnchorSpan™ Terminology
4 AA AnchorSpan™ Component Illustrations
5 Introduction
6 Safety Guidelines
7 Equipment and Labor Recommendations for Manual Installation
8 Footprint Layout
9 Hardware Pattern for Beam Joints, SpanLatch™ Purlins and End Uprights
10 Beam Assembly
11 Attaching SpanLatch Purlins and Cross-Cabling
12 The Gin Pole Method and securing the First Beam with Diagonal Braces
1 3 Erecting Second Beam
14 Latching SpanLatch™ Purlins and Stabilizing with Cross-Cabling
15 Installing the Middle Fabric Panels
16 Mid-Eave Bars
17 Tensioning Middle Panels and Installation of 2-Piece Gabled End Panel
18 Alternate methods for End Installation, Sloped Ends, Installing End Uprights
19 Completing End Framing, Wing & End Eave Bars, Baseplate Adapter Bars
20 Tensioning Gabled End Panel and Customizing for Internal Partitions
21 AnchorSpan™ Wall Systems Illustrated
22 Installing Walls, Mid, End and Eave
APPENDIX
X-2 Installation of Adapter Walls (to other units)
X-3 40’ and 50’ Gabled Ends, End Center Bars and Unique Lacing for Gabled End
X-4 Installation Time chart -- Estimates Time and Crew Requirements
X-5 Guidelines for Disassembly
X-6 Weights, Measures and Suggestions for Packing and Storing
X-7 Template Drawings for Baseplates and End Upright Anchor Plates
X-8 Base Loads for Temporary Structures -- Wind Reactions at Baseplates
X-9 Rafter Chart for 30’, 40’, 50’ & 60’ AnchorSpan™
X-10 Installation Sequence at a Glance
X-11 NOTES
X-12 Limited Warranty/Maintenance Tips
Back Cover Cautions and Liability Limits
1