AirLive WN-200R User Manual
Page 8
AirLive WN-200R User’s Manual
4
Internet On
-
Internet connection is available.
Off - No Internet connection available.
Flashing (Amber) - Problem occurred while trying to establish the
Internet connection.
Reset But-
ton
This button has two (2) functions:
• Reboot. When pressed and released, the Wireless Router will
reboot (restart).
• Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power
On.
2. Keep holding the Reset Button down for 8 seconds.
3. Release the Reset Button. The Wireless Router is now using
the factory default values.
Rear Panel
Figure 3: Rear Panel
Power port
Connect the supplied power adapter here.
WAN port
(10/100BaseT)
Connect the DSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a stan-
dard LAN cable.
10/100BaseT
LAN connec-
tions
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.