AirLive WN-200R - Manual (Page 66)

AirLive WN-200R User’s Manual 62
Data - Single Port Forwarding Screen
Single Port Forwarding
Application Enter the desired application type.
External Port Traffic from the Internet using this port number will be sent to
the Server. This is normally the same as the Internal Port
Number. If it is different, this device will perform a "mapping"
or "translation" function, allowing the server to use a different
port to the clients.
Internal Port Enter the port numbers which the Server software is config-
ured to use.
Protocol Select the protocol (TCP or UDP) used by the Server.
IP Address Enter the desired IP address.
Enabled Use this to Enable or Disable support for this Server, as
required.
6.8 Port Range Forwarding
This feature allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not
be able to access a server on your LAN because:
Figure 54: Port Range Forwarding Screen
Data - Port Range Forwarding Screen
Port Range Forwarding
Application Enter the desired application type.
Start Enter the beginning of the range of port numbers used by the
application server.