AirLive WN-200R - Manual (Page 64)

AirLive WN-200R User’s Manual 60
Figure 52: Port Trigger Screen
Data - Port Trigger Screen
Port Trigger
Enable Use this to Enable or Disable this Special Application as
required.
Name Enter a descriptive name to identify this Special Application.
Outgoing
Ports
• Type - Select the protocol (TCP or UDP) used when you
send data to the remote system or service.
• Start - Enter the beginning of the range of port numbers
used by the application server, for data you send to it. If
the application uses a single port number, enter it in both
the "Start" and "Finish" fields.
• Finish - Enter the end of the range of port numbers used
by the application server, for data you send to it. If the
application uses a single port number, enter it in both the
"Start" and "Finish" fields.