AirLive WN-200R - Manual (Page 11)

AirLive WN-200R User’s Manual 7
Chapter 3 : Setup
This Chapter provides Setup details of the Wireless Router.
3.1 Overview
This chapter describes the setup procedure for:
• Internet
Access
• LAN configuration
• Wireless setup
• Assigning a Password to protect the configuration data.
PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration.
Other configuration may also be required, depending on which features and functions of the Wireless Router you wish
to use. Use the table below to locate detailed instructions for the required functions.
To Do this: Refer to:
Configure PCs on your LAN. Chapter 4:
PC Configuration
Check Wireless Router operation and Status. Chapter 5:
Operation and Status
Use any of the following Advanced features:
• Internet (DMZ, URL Filter)
• Access
Control
• Dynamic DNS
• Options
• Schedule
• Port Trigger
• Single Port Forwarding
• Port Range Forwarding
• QoS
Chapter 6:
Advanced Features
Use any of the following Administration Configuration
settings or features:
• PC
Database
• Config File
• Logs
• E-Mail
• Diagnostics
• Remote
Administration
• Routing
• Upgrade
Firmware
Chapter 7
Advanced Administration
3.2 Configuration Program
The Wireless Router contains an HTTP server. This enables you to connect to it, and configure it, using your Web
Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
• Netscape 7.1 or later.
• Mozilla 1.6 or later