AirLive WN-200R - Manual (Page 43)

AirLive WN-200R User’s Manual 39
Wireless
Security By default, Wireless security on the Wireless Router is disabled.
• If Wireless security remains disabled on the Wireless Router,
all stations must have wireless security disabled.
• If Wireless security is enabled on the Wireless Router, each
station must use the same settings as the Wireless Router.
4.7. Wireless Configuration on Windows XP
If using Windows XP to configure the Wireless interface on your PC, the configuration procedure is as follows:
1. Open the Network Connections folder. (Start - Settings - Network Connections).
Figure 26: Network Connections (Windows XP)
2. Right-click the Wireless Network Connection, check that it is enabled (menu option says Disable, rather than
Enable) and then select View Available Wireless Networks.
3. You will then see a list of wireless networks.
Figure 27 Wireless Networks (Windows XP)
If the "Broadcast SSID" setting on the Wireless Router
has been disabled, its SSID will NOT be listed.
See the following section "If the SSID is not listed" for
details of dealing with this situation.