AirLive WN-200R - Manual (Page 78)

AirLive WN-200R User’s Manual 74
Data - Network Diagnostics Screen
Ping
IP Address Enter the IP address you wish to ping. The IP address can be
on your LAN, or on the Internet. Note that if the address is on
the Internet, and no connection currently exists, you could get
a "Timeout" error. In that case, wait a few seconds and try
again.
Ping Button After entering the IP address, click this button to start the
"Ping" procedure. The results will be displayed in the Ping
Results pane.
DNS Lookup
Internet Name Enter the Domain name or URL for which you want a DNS
(Domain Name Server) lookup. Note that if the address in on
the Internet, and no connection currently exists, you could get
a "Timeout" error. In that case, wait a few seconds and try
again.
Lookup Button After entering the Domain name/URL, click this button to start
the "DNS Lookup" procedure.
Routing
Display Click this button to display the internal routing table. This
information can be used by Technical Support and other staff
who understand Routing Tables.
7.7 Remote Administration
If enabled, this feature allows you to manage the Wireless Router via the Internet.
Figure 62: Remote Administration Screen
Data - Remote Administration Screen
Remote Administration
Enable Remote
Management Check to allow administration/management via the Internet.
(To connect, see below).