AirLive WN-200R User Manual
Page 50
AirLive WN-200R User’s Manual
46
Figure 39: Add Wireless Network
3. Configure this screen as follows:
• Enter the correct SSID, as used on the Wireless Router. Remember the SSID is case-sensitive, so be sure to
match the case, not just the spelling.
• Set
Network Authentication and Data Encryption to match the Wireless Router.
• If using data encryption (WEP or WPA-PSK), enter the key used on the Wireless Router. See the preceding
sections for details of WEP and WPA-PSK.
• Uncheck the options The key is provided for me automatically and This is a computer-to-computer (ad hoc)
network.
• Click OK to save and exit.
4. This wireless network will then be listed in Preferred Networks on the screen below.
Figure 40: Preferred Networks
5. Click OK to establish a connection to the Wireless Router.