AirLive WN-200R User Manual

Page 33

AirLive WN-200R User’s Manual

Obtain an IP address from a DHCP Server

This is the default Windows setting. Using this is recommended. By default, the Wireless Router will act as a DHCP
Server.

Restart your PC to ensure it obtains an IP Address from the Wireless Router.

Specify an IP Address

If your PC is already configured, check with your network administrator before making the following changes.

1. The

Default Gateway must be set to the IP address of the Wireless Router. To set this:

• Click

the

Advanced button on the screen above.

• On the following screen, click the Add button in the Gateways panel, and enter the Wireless Router's IP ad-

dress, as shown in Figure 18 below.

• If necessary, use the Up button to make the Wireless Router the first entry in the Gateways list.

Figure 18 - Windows NT4.0 - Add Gateway

2. The DNS should be set to the address provided by your ISP, as follows:

• Click the DNS tab.
• On the DNS screen, shown below, click the Add button (under DNS Service Search Order), and enter the

DNS provided by your ISP.