6 port trigger – AirLive WN-200R User Manual
Page 63
AirLive WN-200R User’s Manual
59
Session 1
Session 2
Two (2) separate sessions or periods can be defined. Session
2 can be left blank if not required.
Start
Enter the start using a 24 hr clock.
Finish
Enter the finish time using a 24 hr clock.
Local Time
Time Zone
In order to display your local time correctly, you must select
your "Time Zone" from the list.
Adjust for Day-
light Savings
Time
If your region uses Daylight Savings Time, you must manually
check "Adjust for Daylight Savings Time" at the beginning of
the adjustment period, and uncheck it at the end of the Day-
light Savings period.
Use this NTP
Server
If you prefer to use a particular NTP server as the primary
NTP server, check the checkbox "Use this NTP Server" and
enter the Server's IP address in the fields provided.
If this setting is not enabled, the default NTP Servers are
used.
Current Time
This displays the current time on the Wireless Router, at the
time the page is loaded.
6.6 Port Trigger
If you use Internet applications which use non-standard connections or port numbers, you may find that they do not
function correctly because they are blocked by the Wireless Router's firewall. In this case, you can define the applica-
tion as a "Port Trigger".
The Port Trigger screen can be reached by clicking the Port Trigger on the screen.
You can then define your Port Trigger. You will need detailed information about the application; this is normally avail-
able from the supplier of the application.
Also, note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client (PC) viewpoint