AirLive WN-200R - Manual (Page 76)

AirLive WN-200R User’s Manual 72
Figure 60: E-Mail Screen
Data - E-Mail Screen
E-Mail Notification
Turn E-mail
Notification on Check this box to enable this feature. If enabled, the E-mail
address information (below) must be provided.
Send to this E-
mail Address Enter the E-mail address the Log is to be sent to. The E-mail
will also show this address as the Sender's address.
Outgoing
(SMTP) Mail
Server Enter the address or IP address of the SMTP (Simple Mail
Transport Protocol) Server you use for outgoing E-mail.
Mail Sender
Address Enter the mail address of the sender. The E-mail will also show
this address as the Sender's address.
My SMTP Mail
Server requires
authentication To stop spanners, many SMTP mail servers require you to log
in to send mail. In this case, enable this checkbox, and enter
the login information (User name and Password) in the fields
below.
User Name If you have enabled "My SMTP Mail Server requires authenti-
cation" above, enter the User Name required to login to your
SMTP Server.
Password If you have enabled "My SMTP Mail Server requires authenti-
cation" above, enter the password required to login to your
SMTP Server.