Appendix command line management – AirLive WL-5470POE User Manual
Page 77
WL-5470 POE User’s Manual
74
Appendix Command Line Management
WL-5470POE provides telnet and Secure Shell (SSH) for remote management. You can use telnet or some
free software such as putty (
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
) as
telnet/SSH client.
Refer to the following table for detail.
All commands will tack effect only after reboot
[Mode] Wireless Mode
sys
operation
<0:AP|1:Client|2:Bridge|3:WDS
Repeater|4:Universal
Repeater|5:WISP|6:WISP+Unive
rsal Repeater|7:Gateway>
[Mode] Basic Settings
wlan
alias
[string]
active
[on|off]
chid
[channel_id|auto]
essid
[essid]
rssid [rssid]
band
[b|g|bg]
mode
[client
clone
[mac_addr|auto|manual]
encrypt
[both|wlan|wan]
wds
peer
disp
add
[mac]
delete
[id]
clearall
encrypt
[off]
wep [64|128]
wpa [tkip|aes]
wpa2 [mixed|aes]
stp
[on|off]
isolation
[on|off]
wlan
alias
[string]
[Mode] Site Survey
wlan
survey
connect
[id]
(only support in Client, WISP,
Universal Repeater Mode,
WISP + Universal Repeater
Mode )
[Mode] Security
wlan
auth
[open|share|auto]
security
encrypt
[off]
wep [64|128]
<1:key1|2:key2|3:key3|4:key4
>