AirLive WL-5470POE - Manual (Page 13)

WL-5470 POE User’s Manual 10
Item # Function Description
A Power Adaptor 12V 1A power supply adaptor delivered with product.
B 1/PoE/WAN 802.3af PoE LAN port or WAN port(Gateway Mode only)
C LAN port 2 LAN port
D (Factory) Reset
Press over 3 seconds to reboot this device.
Press for over 10 seconds to restore factory settings.
Performing the Factory Reset will erase all previously entered device
settings.
Table 2: Connection Ports
1.3.3 Configuration Setups
The factory default settings of WL-5470POE are as following:
Settings Default Value
Device Name WL-5470POE
Radio 802.11b/g
SSID airlive
Channel 11
WEP Disabled
IP Address 192.168.100.252
DHCP Server ¾ In AP, Client, Bridge, WDS Repeater and Universal Repeater mode, the
default DHCP Server is disabled, please set your PC's IP to the same
subnet as the AP to access the AP.
¾ In WISP, WISP + Universal Repeater and Gateway mode, the default
DHCP server is enabled. Please restart your PC to renew the IP address.
DHCP IP Range 192.168.100.100 ~ 192.168.100.200
Table 3: Default Setting
○ A ○ B ○ C ○ D