AirLive WL-5470POE - Manual (Page 64)

WL-5470 POE User’s Manual 61
4. Please fill in the 2 entries as shown on the graphic below
5. Reboot the AP
Example2: Client Mode Traffic Control
In the following example, the AP is used as the wireless client to the WISP Service. The Service provider
need to restrict the bandwidth of the AP to 1024K Downstream and 128K Upstream.
Step-by-Step Configuration
1. Please enable the “Interface Traffic Control”
2. Enter “1024” in the “LAN Output Rate” field
3. Enter “128” in the “WLAN Output Rate” field
4. Press “Save”
5. Reboot the AP