AirLive WL-5470POE - Manual (Page 60)

WL-5470 POE User’s Manual 57
A. Interface
Control Settings:
In the Interface Control Settings, the AP only controls the total bandwidth limit of an interface. For example, if
you want to limit the output data rate of the LAN to 512K and the output data rate of WLAN to 1024K. You
should perform the following steps:
1. Enable the “Interface Traffic Control
2. Enter “512” in the “LAN Output Rate”
3. Enter “1024” in the “WLAN Output Rate”
4. Click on “Save”
5. Reboot the AP.
B. Define
Policy
A policy is a set of bandwidth rules that can be used
as a template. For example, if you want to provide
2 kinds of bandwidth speed to the users:
z
VIP Subscriber:
„ LAN Out Rate: 512 Kbps
„ WLAN Out Rate: 1024 Kbps
z Regular Subscriber:
„ LAN Out Rate: 64 Kbps
„ WLAN Out Rate: 512 Kbps
You can configure the bandwidth rule as policies “VIP” and “Regular”.