AirLive WL-5470POE - Manual (Page 24)

WL-5470 POE User’s Manual 21
2.1.7 WISP + Universal Repeater mode
In this mode, the AP behaves virtually the same as the WISP mode, except one thing: the AP can also send
wireless signal to the LAN side. That means the AP can connect with the remote WISP AP and the indoor
wireless card, and then provide IP sharing capability all at the same time!
To set the operation mode to Client (Infrastructure), please go to “Mode” field and select the “WISP +
Universal Repeater” mode.