AirLive WL-5470POE - Manual (Page 49)

WL-5470 POE User’s Manual 46
¾ DMZ: You can use DMZ Settings to provide connection on internet. For example, you can have your
own web server at home and provide access on internet. This will need port 80 by default for Virtual
Server Settings.
¾ Remote Management: This is to configure WL-5470POE be managed from internet. Note that port 80
is always used by web service. You can change the port to prevent conflict.
¾ Dynamic DNS: Dynamic DNS (DDNS) allows you to create a hostname that points to your dynamic IP
or static IP address or URL. WL-5470POE provide Dynamic DNS client using DynDNS, please visit
http://www.dyndns.org for detail.
¾ Ping: You can enable to the “Response to WAN Ping” to allow remotely ping your WL-5470POE.
¾ DoS Setting: In WL-5470POE, a denial-of-service attack (DoS attack) can block or limit the system
sending network flood to your local computer.
¾ Diagnostics: The nslookup command can be used in diagnostics to find the IP addresses of a particular
computer, using DNS lookup. The name means "name server lookup". The most common version of the
program is included as part of the BIND package.
¾ URL Filtering: The URL filter database is used for internet filtering that blocks access to unwanted web
content by URLs.
¾ MAC Filtering: Enables you to allow or deny Internet access to users within the LAN based upon the
MAC address of their network interface.
¾ IP Filtering: The IP filter function enables you to define a minimum and maximum IP address range filter;
all IP addresses falling within the range are not allowed Internet access
To configure the security connection, please refer to Section 3.9 Wireless Security Settings ……
To configure the Advanced Settings, please refer to Section 3.10 Advanced Wireless Settings ……
To configure the access control, please refer to Section 3.11 Access Control Settings ……
To configure the Traffic Control, please refer to Section 3.12 Access Control Settings ……