AirLive WL-5470POE - Manual (Page 10)

WL-5470 POE User’s Manual 7
Traffic Control QoS Function
Traffic Control is a great tool to control the bandwidth
of the WISP subscribers. Therefore, the WISP
operators can offer different class of connection
speeds for different subscription fees - just like the
ADSL service! The AirLive advance Traffic Control
firmware can control the bandwidth by Interface or
IP/MAC.
Dynamic Signal Survey Function for Antenna Alignment
Having trouble align your antenna correctly to the other
outdoor AP? The AirLive Wireless Signal Survey
function tells you the receiving signal strength
dynamically as your antenna turns. It automatically
refreshes itself in the process, therefore, making antenna
alignment much simpler than before.
Wireless Site Survey Connection Wizard
During a new WISP service installation, the
installer will need to find out which outdoor AP
provide the best signal in the area for connection.
The AirLive wireless site survey function provides
one step setup for this process. First, the site
survey page shows which AP has the strongest the
signal. Then the installer performs antenna
alignment by using the signal survey function. At
last, the installer simply clicks on “connect” button
to establish connection. The site survey is
available even in AP mode, so the installer can
check the channels used by surrounding APs to
avoid interferences.
Telnet Function
Some WISP operators prefer to use CLI
command line for configurations. The firmware
provides full command line feature via Telnet.