AirLive WL-5470POE - Manual (Page 30)

WL-5470 POE User’s Manual 27
3.3 Bridge Mode Settings
¾ Alias Name: Another name for WL-5470POE.
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, by so doing,
you won’t be able to make wireless connection with this Access Point in the network you are located. In
other words, this device will not be visible by any wireless station.
¾ Band: You can choose one mode of the following you need.
~ 2.4GHz (B): 802.11b supported rate only.
~ 2.4GHz (G): 802.11g supported rate only.
~ 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.
The default is 2.4GHz (B+G) mode.
¾ Channel Number: Allow user to set the channel manually or automatically. If set channel manually, just
select the channel you want to specify. If
“Auto” is selected, user can set the channel range to have
Wireless Access Point automatically survey and choose the channel with best situation for
communication. The number of channels supported depends on the region of this Access Point. All
stations communicating with the Access Point must use the same channel.
¾ 802.1d Spanning Tree: Spanning tree is to prevent bridge loop when there are multiple active paths
between network nodes. Bridge loop could cause connection fail or broadcast storm. Spanning tree