AirLive WL-5470POE - Manual (Page 56)

WL-5470 POE User’s Manual 53
3.11 Access Control
When Enable Wireless Access Control is checked, only those clients whose wireless MAC addresses listed in
the access control list can access this Access Point. If the list contains no entries with this function being
enabled, then no clients will be able to access this Access Point.
Wireless Access Control Mode: Select the Access Control Mode from the pull-down menu.
~ Disable: Select to disable Wireless Access Control Mode.
~ Allow Listed: Only the stations shown in the table can associate with the AP.
~ Deny Listed: Stations shown in the table won’t be able to associate with the AP.
MAC Address: Enter the MAC Address of a station that is allowed to access this Access Point.
Comment: You may enter up to 20 characters as a remark to the previous MAC Address.