AirLive WL-5470POE - Manual (Page 53)

WL-5470 POE User’s Manual 50
802.1X (Radius)
Authentication by the remote server (RADIUS Server).
Security: You can select None, WEP, WPA (TKIP), WPA (AES), WPA2 (AES), WPA2 Mixed method for data
encryption.
~ WEP: 802.1x Authentication is enabled and the RADIUS Server will proceed to check the 802.1x
Authentication, and make the RADIUS server to issue the WEP key dynamically. You can select WEP
64bits or WEP 128bits for data encryption.
~ WPA (TKIP) / WPA (AES): WPA-RADIUS authentication use WPA (Wi-Fi Protect Access) data
encryption for 802.1x authentication. WPA is an encryption standard proposed by WiFi for advance
protection by utilizing a password key (TKIP) or certificate. It is more secure than WEP encryption.
~ WPA2-AES / WPA2-Mixed: The two most important features beyond WPA to become standardized
through 802.11i/WPA2 are: pre-authentication, which enables secure fast roaming without noticeable
signal latency. Pre-authentication provides a way to establish a PMK security association before a
client associates. The advantage is that the client reduces the time that it's disconnected to the
network.
Authentication RADIUS Server: Enter the RADIUS Server IP address and Password provided by your ISP.
~ Port: Enter the RADIUS Server’s port number provided by your ISP. The default is 1812.
~ IP Address: Enter the RADIUS Server’s IP Address provided by your ISP.
~ Password: Enter the password that the AP shares with the RADIUS Server.
Accounting RADIUS Server: Enter the Accounting RADIUS Server IP address and Password provided by
your ISP.