Advertisement mode, Electronic name tags – 2N Helios IP Vario User Manual
Page 41
41
3.3 Display-Equipped Intercom Viewed by External
User
Until the display program is uploaded to
, the display shows the
2N
®
Helios IP Vario
following text:
; refer to the figure below. In
2N Helios IP display is not configured
this state,
behaves and is controlled like no-display models, see
2N
®
Helios IP Vario
Display-Equipped
Control as Viewed by External User.
2N
®
Helios IP Vario
With the proper display configuration, the advertisement or electronic name tag mode
is displayed upon the
power on as pre-programmed.
2N
®
Helios IP Vario
The display-equipped
model is controlled using the numeric
2N
®
Helios IP Vario
keypad and quick dialling buttons. Buttons 2, 4, 6 and 8 are cursor keys in the
telephone directory mode. Buttons 3 and 6 are functional keys and initiate the action
displayed in the right-hand and left-hand screen corners.
Advertisement Mode
One or more images defined in the display program are displayed in the advertisement
mode. To quit the ad mode and move to the electronic name tag mode, push any quick
dialling button or numeric keypad key.
Electronic Name Tags
1, 2 or 4 name tags emulating the paper name tags can be displayed in the electronic
name tag mode. Push one of the 1, 2, 4 and 5 quick dialling buttons to call the user
assigned.
You can also enter the door lock opening codes and activate or deactivate a user or
profile in this mode. For steps refer to the no-display
subsection.
2N
®
Helios IP Vario