2N Helios IP Vario - Manual (Page 37)

37
2N TELEKOMUNIKACE a.s., www.2n.cz
®
The device will have the following network parameters after restart:
IP address: 192.168.1.100
Network mask: 255.255.255.0
Default gateway: 192.168.1.1
Dynamic IP Address Setting
Follow the instructions below to enable automatic getting of network parameters from
the DHCP server:
Connect to the power supply (or, disconnect and reconnect 2N
®
Helios IP Vario
it if already connected).
Wait for the first acoustic signal
Press following buttons sequentially:
2, 1, 1, 2, 2, 3 for 3-buttons models
5, 4, 4, 5, 5, 6 for 6-buttons modely
The acoustic signal indicates mode switching.
Wait until the device is restarted automatically.
Figure 3.2 Switching to dynamic IP address
Note
The 1, 1, 1, 2, 2, 3 sequence must be entered within 30 seconds after the
first sound signal for security reasons. The inter-digit delay may be 2s at
most.