Configuration 3.3, Jpeg video setting, Jpeg video use – 2N Helios IP User manual, 1510 v1.11 User Manual

Page 84

Configuration

3.3

Figure 3.34 Streaming Video Receiving

JPEG Video Setting

Anonymous access

You can download a JPEG video from any IP address without authentication.
Otherwise, the video is only accessible after login or during a call if the Call
activation is enabled.

Call activation

Set whether the JPEG video is available to the terminal upon the call beginning.
The function must be supported by the terminal (Snom 820/870, e.g.).

Frame rate

Set the transmission rate to be offered to the end terminal.

JPEG quality

Set the JPEG image quality. The recommended value is 85. The parameter affects
the image size and quality.

JPEG Video Use



The JPEG video can be used for any application that is capable of downloading

JPEG images from 2N

Helios IP web interface.



To load an image from a camera enter any of the links below in your web
browser:

http://helios_ip_address/enu/camera160x120.jpg

http://helios_ip_address/enu/camera320x240.jpg

http://helios_ip_address/enu/camera352x272.jpg