2N Helios IP User manual, 1510 v1.11 - Manual (Page 53)

Quick Configuration for Calling 3.2
53
Position enable
The Position enable switch defines whether the particular position is enabled or
disabled. You have to enable a position to dial its telephone number. To select a
position status, either push a quick dialling button (for positions 1–54) or enter
the position number using the 2N
® Helios IP numeric keypad.
Position name
Here enter a personal name for the selected telephone directory position. This
parameter is optional and facilitates the telephone directory search.
Telephone numbers
Enter up to three telephone numbers for a selected telephone directory position.
These numbers are called sequentially, one after another.
Number 1, 2 and 3:
Enter the station telephone number to which the call should be forwarded. If the
station number included in Number 1 fails to answer, the call will be forwarded
automatically to Number 2, and so on. For the call forwarding timeout refer to the
Miscellaneous subsection.
It is unnecessary to define the remaining parameters for a quick configuration. For
details on the parameters necessary for a detailed configuration, refer to the
subsections below.