2N Helios IP User manual, 1510 v1.11 - Manual (Page 48)

Quick Configuration for Calling 3.2
48
3.2 Quick Configuration for Calling
This section describes the most common and convenient way of configuration. For
details on the configuration parameters refer to the subsections below.
Language Selection
Before starting to configure, select the administration web server language using the
folder menu in the right-hand upper corner of the screen.
Network Settings
If you have not set the IP address obtaining from the DHCP server, change the default
IP address of your 2N
® Helios IP. To set the IP address, use the Other settings –>
Network menu as shown in the Network subsection.
Static Parameter Setting
For Windows OS users: to know your network parameters, enter in the command line:
ipconfig –all
.
Static IP address
Set the IP address assigned by your LAN administrator.
Network mask
Set the network mask.
Default gateway
Set the default network gateway.
Primary DNS
Set the primary Domain Name Server IP address for your LAN.
Secondary DNS
Set the secondary Domain Name Server IP address for your LAN.