Locks, Configuration 3.3, Lock settings – 2N Helios IP User manual, 1510 v1.11 User Manual

Page 64

Text mode
Original mode

Configuration

3.3

Locks

This menu helps you set the opening codes and modes for locks 1 to 4 attached to
2N

Helios IP (for Part Nos. 9137131(CK)E, 9137161(CK)E and 9137111(CK), locks 3

and 4 are supported only if a licence key is inserted, Part No. 9137901).

Figure 3.17 Lock Settings

Lock Settings

Lock enabled

Enable or disable lock control globally. If disabled, the lock cannot be opened with
any of the codes entered (including the user lock codes) or activated by a call or
speed dialling button.

Time profile

Assign a time schedule to the lock code for global management. If the assigned
time schedule is not active, the lock switch cannot be opened with a lock code or
activated by a call or speed dialling button. Refer to the Scheduler subsection for
details on time schedule settings.