2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 - Manual (Page 46)

Voice function 4.1
46
Call forwarding
For forwarding activation you must specify the calls will be
forwarded to. You may specify , if you want to forward specified call type
only. You may specify in seconds for forwarding if no answer too.
Description of field codes:
Voice:
Data:
Fax:
Call forwarding unconditional
If activated, incoming calls will be always forwarded to the configured telephone
number.
Activation for all call types:
Activation for selected call type:
Deactivation:
Status check:
Call forwarding if busy
If activated, incoming calls will be forwarded to the configured telephone number if
there is call in progress on EasyGate.
Activation for all call types:
Activation for selected call type:
Deactivation:
Status check: