2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 - Manual (Page 36)

Table of Parameters 3.2
36
Extra tariff Function No.: -
Pseudo tariff metering setting (tariff is based on call duration). The Extra tariff
parameter defines transmitting of fixed quantity of tariff pulses after call start.
This parameter sets minimal call cost.
Setting options: 0-255
Setting step: 1
Default setting: 0
Tariff [s] Function No.: -
Pseudo tariff metering setting (tariff is based on call duration). The Tariff
parameter sets the call cost according to call duration. Set how often in seconds
do you want to transmit pulses. Smaller number means more expansive call. 0
means not to transmit pulses according to call duration.
Setting options: 0-255 s
Setting step: 1 s
Default setting: 0 s
FAX/DATA routing parametres
Incoming FAX/DATA from GSM network can be routed to telephone line FXS or to COM
(PCFax, communication software). Parameter takes place only on models with FAX
converter, on other models FAX/DATA calls are routed always to COM.
FAX from GSM network routing Function No.: -
FAX from GSM network is routed to selected interface
Setting options: FXS line/COM
Default settings: FXS
DATA from GSM network routing Function No.: -
DATA from GSM network are routed to selected interface
Setting options: FXS line/COM
Default settings: FXS
SMS Sending Input Parameters
Telephone number for SMS Function No.: -
The telephone number to which an SMS is sent upon SMS input activation. If
blank, the function is off.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank