Table of parameters 3.2, 30 signaling, Tone settings – 2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 User Manual
Page 30
Table of Parameters
3.2
30
Signaling
Line reversal indication for call in progress Function No.: -
Select call in progress signaling by telephone line polarity reversal. There is
voltage of reversed polarity on the telephone line during the whole call.
Setting options:
YES/NO
Default setting:
NO
Tariff pulse when call starts/ends
Function No.: -
Signaling of call start or end by tariff pulse.
Setting options:
None
-EasyGate doesn't send tariff pulse as signaling
of call start/end.
Call end -EasyGate sends tariff pulse when call ends.
Call start -EasyGate sends tariff pulse when call
starts.
Call start and end -EasyGate sends tariff pulse when
call starts and ends too.
Default setting: None
Tariff
pulse
frequency
Function
No.:
-
Tariff pulse frequency setting.
Setting options:
16 kHz -EasyGate transmits 16 kHz tariff pulses
12 kHz -EasyGate transmits 12 kHz tariff pulses
Default setting:
16 kHz
Tone settings
Dial tone – Double frequency tone[Hz]
Function No.: -
Set for double frequency tones
Setting options:
YES/NO
Default setting:
NO
Dial tone – frequency [Hz]
Function No.: -
Setting of frequency/frequencies of dial tone.
Setting options:
5-1275 Hz
Setting step:
5 Hz
Default setting:
425 Hz