2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 - Manual (Page 31)

Table of Parameters 3.2
31
Dial tone - cadence Function No.: -
This tone is generated after Off-Hook in case EasyGate is ready to accept dialing.
Setting options: Continuous -EasyGate generate continuous dial
tone
Morse A -EasyGate generate dial tone with
320/320/640/640 ms cadence
Default setting: Continuous
Busy tone – Double frequency tone[Hz] Function No.: -
Set for double frequency tones
Setting options: YES/NO
Default setting: NO
Busy tone – frequency [Hz] Function No.: -
Setting of frequency/frequencies of busy tone.
Setting options: 5-1275 Hz
Setting step: 5 Hz
Default setting: 425 Hz
Busy tone - cadence Function No.: -
Busy tone cadence setting.
Setting options: 330/330 ms -cadence 330 ms tone, 330 ms pause
200/200 ms -cadence 200 ms tone, 200 ms pause
250/250 ms -cadence 250 ms tone, 250 ms pause
375/375 ms -cadence 375 ms tone, 375 ms pause
500/500 ms -cadence 500 ms tone, 500
ms pause
Default setting: 330/330 ms
Tone after disconnection Function No.: -
If the remote subscriber hangs up first, the EasyGate subscriber can hear the tone
selected here.
Setting options: Busy -EasyGate transmits the busy tone upon call
end.
Permanent
-EasyGate transmits the permanent
tone upon call end.
Default setting: Busy tone