2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 - Manual (Page 17)

Before You Start 2.2
17
2.2 Before You Start
Product Completeness Check
Check the product for completeness before installation please:
„ 1× 2N ® EasyGate
„ 1× Antenna for direct connection 1)
„ 1× Magnetic Antenna with coax cable 1)
„ 1× Supply adapter
„ 1× Telephone Cable
„ 1× PC-connection serial cable
„ 1× SMS sending input connector
„ 2× Dowel
„ 2× Bolt
„ 1× CD-ROM with User Manual and software 2)
„ 1× Quick Installation Guide + mounting pattern
Note
„ 1) The delivery includes an antenna to be connected directly to the
EasyGate SMA connector. An antenna with a cable should be used when
UMTS/GSM signal is poor or in case of interference with other devices
„ 2) Enclosed software:
EasyGate PCManager
EasyGate SMSgateway for easy SMS sending and receiving
EasyGate Driver for PC
User Manual in format PDF
Lists of AT Commands for SIEMENS GSM modules used
Installation requirements
„ EasyGate is designed for vertical mounting on suspension holes (use the
mounting pattern). This position is the best for signal reception because a
vertical antenna is used. EasyGate can be operated in the horizontal position
too where the GSM signal is good.
„ Install EasyGate with respect to the GSM signal strength – check the signal
strength using the PCManager.
„ Place EasyGate out of range of sensitive devices and human bodies for
electromagnetic interference reasons.
„ For the allowed range of operating temperatures refer to the “Technical
Parameters”.