Brother MFC 8700 - Manual (Page 80)

S E T U P A U T O D I A L N U M B E R S 7 - 2
If you need to store a pause longer than 3.5 seconds, press Redial/Pause two or
more times.
Even if you lose electrical power, numbers stored in memory will not be
lost.
Storing Speed Dial Numbers
You can store Speed Dial numbers, so you can dial by pressing only three
keys (and
Start ). There are 100 Speed Dial locations. Even if you lose
electrical power, numbers stored in memory will not be lost. (See Speed
Dialing, page 8-2.)
1 For the FAX, press Function , 6 , 2 .
For the MFC, press Function , 1 , 6 , 2 .
2 Use the dial pad to enter a two-digit location S P E E D - D I A L ? #
E N T E R & S E T
(00–99) and press Set .
3 Enter the number (up to 20 digits) and # 0 5 :
E N T E R & S E T press Set .
4 Use the dial pad to enter the name
N A M E :
E N T E R & S E T (up to 15 characters) and press Set .
You can use the chart on page 4-2 to help
you enter letters—OR—Press
Set to store
the number without a name.
5 or to select the type of number
FAX a fax number
TEL a telephone (voice) number
FAX/TEL both fax and telephone number
and press Set .
6 Return to Step 2 to store another Speed Dial number—OR—Press Stop to
exit.
Even if you lose electrical power, numbers stored in memory will not be
lost.