Brother MFC 8700 - Manual (Page 77)

S E T U P S E N D 6 - 13
Setting Up Polling Transmit
Polling Transmit is when you set up your machine to wait with a document
so another fax machine can retrieve it. (See Interrupting Delayed Fax and
Polling Transmit Jobs on this page.)
1 Place the document to be retrieved in the feeder.
2 For the FAX, press Function , 3 , 8 .
For the MFC, press Function , 1 , 3 , 8 .
3 Press or to choose
P O L L E D T X : O F F ?
S E L E C T <- -> & S E T
POLLED TX:ON? and press Set .
4 Press 1 to select DOC if you want your 1 . D O C 2 . M E M O R Y
machine to scan the printed document at
the time it is polled—OR—Press
2 to select MEMORY.
5 Press 1 if you want to select additional settings. The display returns to
the SETUP SEND menu—OR—Press 2 if you are finished choosing
settings and go to step 6.
6 Press Start .
If you pressed 1 in Step 4, the printed document remains in the document
feeder until your machine is polled. However, you can “interrupt” it to
send another fax.
Interrupting Delayed Fax and Polling Transmit Jobs
You can send a fax or make a copy now, even if you have the machine set
to send a fax later or to be polled. However, you cannot use automatic
redial or the Function mode. (See Delayed Fax, page 6-10 and Setting Up
Polling Transmit on this page.)
1 For the FAX, press Function , 5 .
For the MFC, press Function , 1 , 5 .
2 Wait 2 seconds, then remove the documents that are waiting in the
feeder.
3 Place the “new” document you want to
I N S E R T D O C U M E N T
send now in the feeder.
4 Enter the new fax number for the documents you want to send now.
5 Press Start .
6 After the transmission is finished, place the “old” documents back into the
feeder.
7 To restore the Delayed Fax and/or Polling.
For the FAX, press Function , 5 .
For the MFC, press Function , 1 , 5 .