Brother MFC 8700 - Manual (Page 126)

14 - 8 U S I N G B R O T H E R M A C H I N E A S A P R I N T E R
Printing the Internal Font List
You can print a list of the machine’s internal (or resident) fonts to see how
each font looks before you select it.
1 Press Function , 2 , 1 , 1 .
2 Press Start . The machine prints the list.
3 Press Stop to exit.
Printing the Print Configuration List
You can print a list of current printer settings.
1 Press Function , 2 , 1 , 2 .
2 Press Start . The machine prints the settings.
3 Press Stop to exit.
Restoring Factory Default Settings
You can return the machine to original factory settings. Permanent fonts
are restored, but macros are cleared. You can change user settings using
the Remote Printer Console program. (See page 14-1.)
1 Press Function , 2 , 2 , 1 .
2 Press 1 to restore the factory settings
1 . R E S E T 2 . E X I T
—OR—Press 2 to exit without making
a change.
3 Press Stop to exit.
Printing PC Data in Hexadecimal
You can print data as hexadecimal values to check data errors and
problems. If you select HEX DUMP MODE, all PC data is printed
hexadecimal. To turn hexidecimal mode off, press
On/Off Line then Shift and
Test/Reset at the same time.
1 Press Function , 2 , 2 , 2 .
2 Press 1 to set PC to hexidecimal mode
1 . S E T 2 . E X I T
—OR—Press 2 to exit without
making a change.
3 Press Stop to exit.