Brother MFC 8700 - Manual (Page 163)

18 - 1 U S I N G B R O T H E R M A C H I N E W I T H Y O U R A P P L E I M A C
18 18
For USB equipped Apple New Power
Macintosh G3 or iMac with Mac OS 8.5/8.6
This chapter is for the MFC 8300. If you have a MFC 8600 or MFC 8700,
please see the Multi-Function Center Software Manual.
The connection, installation and operation instructions are available on
the bundled CD-ROM for your USB equipped Apple Macintosh or iMac
with Mac OS 8.5/8.6.
1 Set up your MFC and make sure that it is working properly.
2 Unplug the MFC’s AC power cord and turn off the AC power to your
Macintosh or iMac.
3 Connect a standard USB cable to both the MFC and Macintosh or iMac.
Install Brother Printer Driver for MFC 8300
1 Turn on the power to your Macintosh G3 or iMac and wait for the startup
process to be completed.
2 Plug in the MFC power cord to turn it on.
3 Insert the Brother CD-ROM into your CD-ROM drive.
The Brother icon will appear on the desk top.
4 Double-click the Brother icon to open the CD.
5 Double-click the Brother icon again to run Start.
The screen of Brother options will appear:
Using Your Brother Machine
with Your Apple
® New Power
Macintosh ® G3 or iMac ™
(For MFC 8300 Only)