Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 79)

Appendix 76
WLA-AWCG User Manual
5 Select TCP/IP from the Network Protocols panel.
6 Click OK.
The TCP/IP protocol is added.
You will be prompted to restart your computer at this point. Click No because
you still have to specify an IP address. For instructions on how to do this, see
“Specifying the IP address” on page 77.
Windows NT
1 Open the Network - Protocol dialog box as shown in “Checking that the pro-
tocols are added” on page 72.
2 Click Add.
The Select Network Protocol dialog box is displayed.
Figure 58: Select Network Protocol dialog box
3 Select TCP/IP Protocol and click OK.
The TCP/IP protocol is added.
You will be prompted to restart your computer at this point. Click No because
you still have to specify an IP address. For instructions on how to do this, see
“Specifying the IP address” on page 77.