Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 71)

Troubleshooting 68
WLA-AWCG User Manual
Cause 7:
The network setting is incorrect.
Solutions:
Ensure that the Protocol, Workgroup Name and Share settings are correct.
„
To check the protocols, refer to the AirStation Pro Installation chapter,
“Checking the TCP/IP settings” on page 31 .
„
To check the Workgroup Name, go to your Network Neighbourhood
properties and select the Identification tab.
„
To check the Share settings, go to the properties of your hard drive and select
the Sharing tab.
6.2.7 Search is taking a long time to display other computers.
Cause 1:
The other computer is not connected to the network.
If your computer cannot access that computer, this may be because the registry
is displaying a “ghost entry”. This means that the requested computer is not
actually connected to the network, but the registry has not updated since that
computer was disconnected.
Solutions:
To check this, you must do the following:
1 On the Start menu, select Find, Computers.
2 Enter the name of the computer you want to search for.
3 Click Search.
4 Double-click the computer icon when the search is complete.