Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 53)

Configuring AirStation Settings 50
WLA-AWCG User Manual
5.2.6 Restricting Wireless LAN PC’s
This function allows you to restrict the number of Wireless LAN PC’s that can be
connected to the network. Once this function is enabled, only Wireless LAN PC’s
that have been registered can connect to the network.
To enable the function, follow these steps:
1 Open the Basic Settings screen. For instructions on how to do this, see
“Displaying the Settings screen” on page 43 .
2 Click Advanced Settings and then Wireless LAN Restrictions in the left
panel.
The Wireless LAN Restrictions Setup screen is displayed.
Figure 46: Wireless LAN Restrictions Setup screen
3 Click the Enable option, adjacent to the Restrict connection from wireless
LAN PC’s field.
4 Enter the MAC address of the Wireless LAN PC that you are permitting to
connect to the network, in the Mac address of wireless LAN PC field.
5 Click Add.
Note: Separate each two digits of the MAC address with a colon (:)